Barrier infrared PXB-100ATC of TAKEX


Barrier infrared PXB-100ATC of TAKEX


Our PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical. Sophisticated dual response output systems have been designed to distinguish and allocate specific alarm responses based on the size and speed of target objects moving through the detection area, and a unique synchronized timing system ensures unrivalled detection performance and versatility.

  • Independent control of upper and lower beams
  • Choose between synchro-quad and anti-crawl operation
  • Dual outputs for crawl attempt and full beam break
  • Sync wire allows unlimited stacking without crosstalk
  • 4 selectable beam channels
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • IP65 housing




Detection System

Near infrared beam interruption system (4 beams simultaneous interruption or upper / lower 2 beams interruption)

Infrared beam

Double modulation pulsed beam by Infrared LED

Protection distance

Outdoor 100m (330ft) or less

Max. arrival distance

1,000m (3,300ft)

External light immunity

50,000 lux

Response time

OR gated: upper 2 beams and lower 2 beams simultaneous interruption 0.05 sec. upper 2 beams interruption or lower 2 beams interruption: 0.1/0.2/0.3/0.5 sec. (selectable)

Power supply

12-30VDC (non-polarity)

Current consumption

Transmitter : 27mA / Receiver : 48mA

Alarm output

Dry contact output: N/C or N/O selectable

Contact action: Interruption time (min. 2 sec)

During the synchro signal down, alarm signal output continuously.

Capacity: AC/DC30V 1A (resistive load) Protective resistor

Environmental output

Dry contact output: N/C or N/O selectable

Action: activated when weather condition worsens

Capacity: AC/DC30V 1A (resistive load) Protective resistor

Tamper output

Dry contact output: N/C.

Action: activated when cover is detached

Capacity: AC/DC30V 0.1A (resistive load) Protective resistor

Alarm LED

RED LED (only receiver) ON: when an alarm is initiated

Attenuation LED

RED LED (only receiver) ON: when beam is attenuated


Modulated beam frequency selection, Tone indicator, Environment module Beam Power selection, Transmitting power adjustment, Programmed AGC, Synchro timing selection, Auto-gain lock function, Monitor jack, Tamper, Response time adjustment, Alarm output selection, Environment output selection, Upper/Lower beam switch,

Wireless Alignment Checker connecting function.

Beam adjustment

Horizontal: ±90° / Vertical: ±20º

Ambient temperature

-13°F to 140°F (-25°C to +60°C)

Mounting positions

Outdoor, Indoor




Transmitter : 49oz (1,400g) / Receiver : 51.5oz (1,470g)


PC resin (wine red)


Pole attachment, Anti-Bird spike, Screws, Instruction manual