Pre-installed double-sided easyPack protection towers (360°) – 2 metres
Pre-installed double-sided easyPack protection towers (360°) – 2 metres
Pre-wired double-sided tower (360°) with the basic components required, ready to be installed (2m).
It includes:
- Anodized aluminum profile.
- UV resistant polycarbonate cover.
- Top & bottom ABS bases.
- Mother board with thermostat.
- As many heaters as transmitters/receivers the tower includes.
- Anti-sabotage tamper switch.
Everything prewired is and mounted together with the IR beams (*) and their supports, chosen by the customer.
(*) It is compatible with different photobeam models (not included in price).
Height: 2m.
Number of photobeams: there are different options regarding number of beams and their organization inside the tower (2 sides with Tx, 2 sides with Rx, 1 side Tx – 1 side Rx).
D204RR – two-sided tower with 2 Rx on each side.
D204TT – two-sided tower with 2 Tx on each side.
D204TR – two-sided tower, one with 2 Tx and the other with 2 Rx
D206RR – two-sided tower with 3 Rx on each side.
D206TT – two-sided tower with 3 Tx on each side.
D206TR – two-sided tower, one with 3 Tx and the other with 3 Rx
(Tx = transmitter/s; Rx= receiver/s)
- Minimum required elements for a proper installation:
- easyPack tower with the desired configuration.
- ABXT-LB or ABXT-LLB side brackets (not included).
Installation time reduction: installer’s work becomes easier, he will just have to fix the tower and to align the photobeams.
Ground mounting with the required side brackets (not included).