Infrared barrier PB-IN 50/100/200 HF of TAKEX
Infrared barrier PB-IN 50/100/200 HF of TAKEX
The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to.
For distances up to 50m (165ft) outdoor / 100m (330ft) indoor.
- 4 Synchronised High-Power Beams
- Selectable 4-Channel Beam Frequencies
- Double Modulated Beam for unsurpassed Light Immunity
- Monitor Jack for alignment with Multi-Meter
- Audible Alignment Tone
- Environmental (anti-fog) Monitoring Circuit
- Dynamic A.G.C. Circuit
- Frost Resistant Cover
Model |
PB-IN-50HF |
PB-IN-100HF |
PB-IN-200HF |
Detection system |
Near infrared beam interruption system (4 beams simultaneous interruption) |
||
Infrared beam |
Double modulation pulsed beams by LED |
||
Protection distance |
Outdoor 165' (50m) or less |
Outdoor 330' (100m) or les |
Outdoor 660' (200m) or les |
Max. arrival distance |
Tenfold 1650' (500m) |
Tenfold 330' (1000m) |
Tenfold 6600' (2000m) |
Response time |
50 msec. to 700 msec. variable (Standard: 50 msec.) |
||
Power supply |
12V to 30V DC (non-polarity) |
||
Current consumption |
60mA or less at protection (max. 95mA or less) |
70mA or less at protection (max. 105mA or less) |
85mA or less at protection (max. 120mA or less) |
Alarm output |
Dry contact relay output 1c. Reset: Interruption time + off-delay (approx. 1.5sec) Contact capacity: 30V (AC/DC) 1A or less. |
||
Enviromental output |
Dry contact relay: 1a or 1b (selectable) Contact operation: Output when weather condition gets worse. Contact capacity: 30V (AC/DC) 1A or less |
||
Tamper output |
Dry contact relay : 1b. Contact operation : Output when receiver cover is detached. Contact capacity: 30V (AC/DC) 1A or less |
||
Alarm LED |
Red LED (receiver) lights when an alarm is intiated |
||
Sensitivity attenuation LED |
Red LED (receiver) lights when beam reception is attenuated |
||
Functions |
Modulated beam frequancy selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack |
||
Beam adjustment |
Horizontal: ± 90º C, Vertical ± 10 º |
||
Ambient temperature range |
-31º F to +151ºF (-35º C to +66º C) |
||
Mounting position |
Outdoor |
||
Wiring |
Terminals |
||
Weight |
Transmitter: 42oz (1200g) Receiver: 45.5oz (1300g) |
||
Appearance |
PC resin (wine red) |