Barrier infrared PXB-100SW of TAKEX

PXB-100SW of TAKEX

Barrier infrared PXB-100SW of TAKEX

Referencia: 
PXB-100SW
Descripción: 

Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

Características: 
  • 4 x synchronised high power beams
  • Low-current consumption for battery or solar operation
  • 4 selectable beam channels to prevent crosstalk
  • Double modulation for unsurpassed light immunity
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • Environmental monitoring circuit
  • Dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • IP65 housing
  • Optional BA-6SLA solar panel/battery pack available

 

Model

PXB-100SW

Detection system

Near infrared pulsed beam interruption system

(TR-RE 4 beam simultaneous interruption)

Infrared beam

Double modulation pulsed beam by LED

Protection distance

Outdoor 330' (100 m) or less

Max. arrival distance

3300' (1000 m)

Response time

0.05 sec. to 0.7 sec. (Variable at pot)

Power supply

5 to 30VDC (polarity)

 

 

Current consumption
*1 (armed)
*2 (beam alignment)

5 to 8VDC

10 to 30VDC

Transmitter
Max: 3.7mA *1
Max: 8.2mA *2

Transmitter
Max: 5.2mA *1
Max: 9.4mA *2

Transmitter
Max: 2.3mA *1
Max: 10mA *2

Transmitter
Max: 3.1mA *1
Max: 10.7mA *2

 

Alarm output

Dry contact relay output form N.O./N.C switchable
Contact action: Interruption time (min. 2 sec)
Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor

 

Environmental output

Dry contact relay output form N.O./N.C. switchable
Action: activated when weather condition worsens
Capacity: 30V (AC/DC) 1A (resistive load) Protective resistor

 

Tamper output

Dry contact relay (N.C.)
Action: activated when cover is detached
Capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor

Alarm LED

Red LED (Receiver) ON: when an alarm is initiated

Attenuation LED

Red LED (Receiver) ON: when beam is attenuated

Ambient temperature range

-35° C to +66° C (-31° F to +151° F)

Beam Adjustment

Horizontal : ±90° / Vertical : ±20°

 

 

Functions

Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm output selection, Environmental output selection, Monitor jack, Tamper, Response time adjustment, Upper / Lower beam switch, Wireless Checker

Mounting positions

Mounting positions

IP rating

IP65

Wiring

Terminals

Weight

Transmitter: 1500g (52.5oz) Receiver: 1550g (54.3oz)

Appearance

PC resin (wine red)